Today post

Today post

Mining water pumps

posted by Greencore on Jan 07, 2019
tags: Mining water pumps

Mining water pumps

Hire water pump and mining water pumps at Snort Pump. Visit us to get xylem water pumps and itt water pumps in Australia.The Force 15 pump is a highly innovative 100% Australian pump that is purposely designed for mining. To ensure maximum performance and operational life from your Force 15 Pump there are some basic requirements that must be adhered to.Force 15 Pumps have a pressure operating range of 300-700kPa (30-70m) with a flows of 15.5-2L/s respectively. Running the pump outside this range will cause problems, especially at pressures less than 250kPa (25m) which will eventually damage the pump.Your pump has been fitted with a special colour coded Force 15 Pump pressure gauge and 2” stainless ball valve. The gauge indicates the correct operating pressure for the Force 15 Pump in GREEN. If the pressure gauge indicates in the RED the measures need to be taken to rectify the situation.If the pressure is below the green zone, close the ball valve until the gauge indicates back into the green zone. If the pressure is above the green zone ensure ball valve is adjusted correctly adjusted, if this has no effect the problem lies in the discharge pipe work. Pressure adjustments can be made with the pump running.Visit this website==>>http://snortpump.com.au

1 visits |0 Comments|Reply

Related Posts

There are no comments on this post

Write a New Comment on Mining water pumps

Please Log In or Register to post comments.

[]