sweaterknitting2018

sweaterknitting2018

The top and the bottom of the moulding will get

The prep is very important to the moulding as uniformity in the stain color comes from this prep.Sanding mouldings has always been a long and slow job gloves knitting machine in the small shop but now a new machine on the market are ready to set a stop to that. The top and the bottom of the moulding will get the same sanding and by doing this the same uniform stain color is achieved. The machine will remove light knife marks and prep the wood for staining and sealing. The QuickWood moulding sander will do brush sanding on linier mouldings at up to 50 feet per min. The speed of the spindles are reduce for a softer sanding and again speed of up to 50 feet per min can be reached for sealer sanding on the mouldings. The moulding sanding machine comes with 2 top heads, made with variable speed to change the aggressiveness of the sanding on the moulding. When the sealer coat is applied to the moulding the pre sanding with the Quickwood moulding sander has made sure that no sharp edges are on the moulding. Driven rollers conveys the product though the machine at a variable speed from 10 to 50 feet per min.

1 visits |0 Comments|Reply

Related Posts

There are no comments on this post

Write a New Comment on The top and the bottom of the moulding will get

Please Log In or Register to post comments.

[]